IS215VPROH2BC控制器模塊,提高抗干擾能力

IS215VPROH2BC控制器模塊,提高抗干擾能力

GE提供創新的解決方案和服務，為世界提供必要的基礎設施。GE產品廣泛應用于各個行業。我們是GE的經銷商，提供各種系列的模塊和卡。主要產品有：模塊IC693,IC695,IC697,IC698...繼電保護裝置,SR469,SR369,SR750, 燃機卡件IS200,IS215,IS220, IS420系列 DS200系列DS380系列，VMIVME系列CPU控制卡等

IS200CABPG1ACA is also called CABP board. This board serves as a way for the board inserted therein to interface and interact with external signals. This board provides connection with other external interfaces. These connections include power input, ISBus port, diagnostic tools, front panel instrument and front panel keyboard. This motherboard is usually installed on the innovative series motherboard rack. The rack can provide mounting points for boards inserted into IS200CABPG1ACA.

IS200CABPG1ACA is designed so that all non-board connections will not be accidentally plugged into the wrong jack. Board connections on the board tend to use different types of connections, key them separately, or have the same pin assignment, because they can be interchanged without causing any damage to the board. Only some boards can be inserted into CABP boards. A BAIA board is assigned to slot 1. The DSPX board is assigned to slot 2. Slot 3 is occupied by ACL_ board or GBIA/PBIA mods. Slot 4 is assigned to a BIC board. BPI_ or FOSA board is assigned to slot 5. E1 and E2 piercing connectors on this board are connected to GND. The plug-in connectors of E3 and E4 are connected to CCOM. J1-J12 connector on this board is an external interface connection. J13-J21 connector is the actual card slot.

IS200CABPG1ACA也稱為CABP板。該板用作插入其中的板與外部信號接口和交互的方式。該板提供與其它外部接口的連接。這些連接包括電源輸入、ISBus端口、診斷工具、前面板儀表和前面板鍵盤。該主板通常安裝在創新系列主板機架上。該機架能夠?yàn)椴迦隝S200CABPG1ACA的板提供安裝點。

IS200CABPG1ACA的設計使得所有非板連接不會意外插入錯誤的插孔。板上的板連接傾向于使用不同類型的連接，單獨鍵控，或具有相同的引腳分配，因?yàn)樗鼈兛梢曰Q而不會對板造成任何損壞。只有某些板可以插入CABP板。一個BAIA板被分配給插槽1。DSPX板被分配到插槽2。插槽3被ACL_ board或GBIA/PBIA mods占用。插槽4被分配給一個BIC板。BPI_或FOSA板被分配給插槽5。該板上的E1和E2刺入式連接器連接到GND。E3和E4的插入式連接器連接到CCOM。該板上的J1-J12連接器是外部接口連接。J13-J21連接器是實際的卡插槽。

IS200BPVAG1B是通用電氣為Speedtronic Mark VI系列制造的PCB(印刷電路板)組件。MKVI在所有關鍵控制和保護參數上都有三重冗余備份，是第三個提供三重冗余控制的Speedtronic系統。MKVI中的許多模塊可采用單冗余或三冗余形式，這取決于渦輪機系統的大小和復雜性。

IS200BPVAG1B設計為背板，放置在機架系統的底座中。機架系統將卡一分為二，卡的前半部分仍可從機架外側觸及?？ǖ暮蟀氩糠直粰C(jī)架系統包圍，插入背板的板由機架的側面支撐。需要注意的是，機架與IS200BPVAG1B板是分開的。

IS200BPVAG1B配有21個板連接器。這些是為接受不同種類的卡而設計的。電路板的前半部分有兩行輸入/輸出。一行二十一個，另一行二十個。這些I/o支持與插入背板的板之間的數據傳輸。